6 6.14 EDITION 50 Power Tap Harness The Namz Power Tap Harness allows you to simply install their plug-n-play harness in between the rear fender and main harness and it gives you a 12-volt switched power source. Part#: 893330 , Fitment: 96-13 Sportster , Unit: Each , Qty.: 1 893340 OE Reproduction Complete Bike Harness • Replacement Bike Harness • OEM color-matching harness with ALL OEM connectors preinstalled. • Fuse block holds a full size, commonly available & replaceable starter relay and (3) ATO fuses. • A 30-Amp circuit breaker is installed and is ready for any regulator/charging system. • 100% plug-n-play, easy to install harness that allows for direct connections to all original components. • This harness is an exact replica of the OEM part number, 70153-99. Part#: 928119 , Fitment: 99-03 Sportster, (except 99-03 XL1200S) , OEM #: 70153-99 , Unit: Kit , Qty.: 1 36“ Front Turn Signal Relocation Harness Harness comes with installed OEM connector and tested using color matching wire. Allows front signals to be removed from under switch housings while using original connector under the tank or in the backbone of the bike. • Solder-on • 36“ long left and right color matching wires • Heat shink and pre-installed OE mating connectors included Unit: Each , Qty.: 1 PART# FITMENT 893340 96-20 Sportster, 96-05 Dyna, 96-15 Softail, 96-13 Touring, (except 11 FLTRUSE, 04-06 FLTRI, 12 FLTRXSE, 07-09 FLTR, 09 FLTRSE3, 10, 13 FLTRX, 13 FLTRU, 13 FLTRXSE2, 13 FLTRXSE2 ANV) 893341 06-17 Dyna, 11 FLTRUSE, 04-06 FLTRI, 12 FLTRXSE, 07-09 FLTR, 09 FLTRSE3, 10, 13 FLTRX, 13 FLTRU, 13 FLTRXSE2, 13 FLTRXSE2 ANV Reverse Switch Wire Harness Extensions for Tri Glide Models • Intended to extended the handlebar mounted reverse switch wiring when changing to taller handlebars • Terminal-to-terminal extension requires the removal of the OE connector • Simply connect male terminal to the female terminal, slide over the 3/16“ diameter shrink over the terminals • Note which colors are in which connector location before removal as this will need to be reinstalled Fitment: 09-13 Trike , Unit: Each , Qty.: 1 PART# DESCRIPTION 893343 8“ 893342 4“ 893344 12“ 893345 15“ Complete Bike Harness • OEM color-matching harness with Run/Turn Signal Self Canceling Module. • Fuse block holds a full size, commonly available & replaceable starter relay and (3) ATO fuses. • A 30-Amp circuit breaker is installed and is ready for any regulator/charging system. • Harness provides turn signal functions to the front and rear turn signals. • Oil, neutral, high beam, and turn signal indicator wiring • Color matching handlebar switch wiring as found on ‚96-13 non-glide models. • Headlight wiring with headlight socket and terminals. • Front turn signal connectors and terminals. • Rear fender harness with connectors and terminals. • Key switch wiring with ring terminals. • Coil wire with ring terminals, tachometer, horn, oil sending unit, brake switch and neutral switch wiring with terminals. • Sections of 3/16“, 1/4“, 3/8“ and 1/2“ ID heat shrink included. • Heavy gauge 12 (+) power and -) ground wires with terminals for battery connection. Part#: 928120 , Fitment: 96-05 Dyna, 96-06 Softail , Fitment Note: With basic turn signal function, except EFI models , Description: With Starter Relay, 3-Circuits and Turn Signal Self Canceling Module , Unit: Kit , Qty.: 1
RkJQdWJsaXNoZXIy ODQ0NDEw