APPAREL HAND CONTROLS LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT SEATS & TOURING FOOT CONTROLS 6.103 FOR MORE DETAILS CHECK WWW.CUSTOM-CHROME-EUROPE.COM Premium SAE Extension Cable for Battery Charger • Premium extender for battery chargers rated up to 5 Amps • Rated for 5 Amp continuous use (7 Amp max.) • Corrosion protected – Nickel coated contacts • Rubber in-line seal protects SAE connection against dirt and water • Rated for low temperatures and outdoor use • Thicker insulation (1,2 mm) for better protection Unit: Each , Qty.: 1 PART# DESCRIPTION 926602 Length: 180 cm 926603 Length: 460 cm Solar Duo 10W Battery Charger 6-step 12V / 12.8V 0.83A sealed solar charger and maintainer. OptiMate Solar DUO 10W is a smart sun powered charger and maintainer for all 12V batteries. The optimate 1 duo adapts automatically to the connected battery type (Lithium or standard). The controller’s fully automatic multi-step program brings the battery safely to full charge – Connect to the battery and OptiMate Solar DUO 10W does the rest, no supervision required. The fully automatic multi-step program of the controller brings the battery to full charge. OptiMate Solar DUO’s smart control guarantees longer battery life and more battery power! For all 12V power sport battery types including lead-acid (Pb) - STD (with filler caps), AGM and GEL (sealed VRLA), Li-Ion made with LiFePO4 / LFP technology. • Converts low solar energy to efficient pulse charge • DAY: Charge and maintain / NIGHT: monitor charge level • Safe to leave connected - full electronic protection • Saves your dead battery from as low as 4V • Displays battery state of charge • Energy saving technology • IP 54 - works in any weather • Solar panel specs: • 10 Watts max. • 12V / 12.8V • Dimensions: 249 x 376 x 26 mm • Outdoor Use • Solar panel output cable 2000 mm long with SAE connector Part#: 926599 , Field of Application: 12V batteries: leadacid (Pb) - STD (with filler caps), AGM and GEL (sealed VRLA), Li-Ion made with LiFePO4 / LFP technology , Unit: Each , Qty.: 1 Pro-1 Duo Battery Charger, Tester, Power Supply OptiMate PRO-1 DUO is the professional combination battery charger-tester and power supply for powersport, small craft, machine professionals, repair shops and battery retailers. 3 Selections: Select a charge mode for 12V lead-acid OR 12.8V LiFePO4, or select PowerSupply mode for battery support during vehicle diagnostics, tuning or troubleshooting. For all power sport 12V batteries including lead-acid (Pb) - STD (with filler caps), AGM & GEL (sealed VRLA) and Li-Ion made with LiFePO4 / LFP technology. • Automatic fast battery activation (green test light indicates battery is healthy and sufficiently charged) • Smart recovery mode for deep discharged batteries • Pushbutton activated BMS reset for LiFePO4 batteries • Test light indication for good (80 to 100%), ok (60 to 80%) and bad (below 60%) batteries • Powersupply mode provides constant power for vehicle tuning, diagnostics and troubleshooting • Global input - 100 to 240V 50-60Hz • AC power socket for Class 2 power cords • Portable use – vehicle hanging hook and wall receiver included • PRO use: 12V lead-acid STD, AGM from 3-50Ah and 12.8V/13.2V Lithium LFP (LiFePO4) from 2-20Ah • Normal use: 12V lead-acid STD, AGM from 3-240Ah and 12.8V/13.2V Lithium LFP (LiFePO4) from 2-120Ah. • 0.4A to 10A variable charging amps(Ampmatic) • 0.5V to 22V charging volts @ 12V lead-acid batteries • 0.5V to 14.4V charging volts @ 12.8V/13.2V lithium batteries • 11V to 13.6V powersupply • IP40 indoor rating Part#: 926600 , Field of Application: 12V batteries including lead-acid (Pb) - STD (with filler caps), AGM & GEL (sealed VRLA) and Li-Ion made with LiFePO4 / LFP technology , Unit: Each , Qty.: 1 O-125 Charge Level Monitor SAE Adapter Cable SAE to SAE adapter with state of charge monitor that connects directly to the SAE battery lead fitted to the 12V battery in your parked powersport vehicle. • Ideal for 12V lead-acid & 12.8V lithium LFP (LiFePO4) batteries • SAE quick connect charge port for charging battery when needed • SAE connection system fits any SAE standard 2-pin connector • Includes in-line seal that mates with OptiMate SAE • With weatherproof sealing cap protects against dirt and water • Battery status indication every 3 seconds (LED blinks) • For high performance AGM and lithium-ion LFP Part#: 926601 , Field of Application: Fits any battery SAE standard 2-pin connector , Unit: Each , Qty.: 1
RkJQdWJsaXNoZXIy ODQ0NDEw