Diese Webseite benutzt Cookies, um Dir die bestmögliche Nutzerfreundlichkeit zu bieten. Wenn Du diese Webseite weiterhin nutzt, wird von Deinem Einverständnis ausgegangen.(mehr dazu)
Milwaukee Iron
Our Work,
Our Passion,
Our Life!
Deutsch
English
0
Startseite - Motoren-Teile - Drag Specialties Artikel 09402010

JIMS COVER TPT LO PRO M8 BLK

09402010 - JIMS COVER TPT LO PRO M8 BLK Ihr Preis 248,83 €  

inkl.19% MwSt.
zzgl. Versand 
HINWEIS: Die gezeigten Bilder dienen nur als Referenz, das tatsächliche Produkt kann abweichen.
Daher bitte immer die Beschreibung durchlesen, bzw. auf der entsprechenden Katalogseite nachlesen.
 

Spezifikationen:  
   
Artikel-Nr.: 09402010
Verpackungseinheit: KT
Katalogseite: 643
Hersteller/Vertrieb:: JIMS / Drag Specialties
OEM Referenz: n/a

 

Beschreibung

COVER TPT LO PRO M8 BLK

Für mehr Informationen klicke hier...


Eine Seite zurück  
dragspecialties.eu / partseurope.eu WINDSHIELDS & FAIRINGS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION, CLUTCHLINE & DRIVELINE ENGINE GASKETS & SEALS LIGHTING & LICENSE PLATES ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES & BRAKE LINES DASHES & GAUGES FENDERS COVERS, LOCKS & GENERAL AUDIO, COMMUNICATION & MOUNTS FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES DISCLAIMER: SEE PAGE 5 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATORY COMPLIANCE INFORMATION. SECTION 6 All part numbers in BLUE are new for 2022. See OLDBOOK For Early Model Applications 643 PART # DESCRIPTION FOR 17-21 M-EIGHT, 99-17 TWIN CAM, 00-21 XL/XR 1200 (EXCEPT 21 SPORTSTER S/RH 1250S) AND 00-09 BUELL 0929-0014 Standard 0929-0023 +0,005” oversize POWERGLIDE II HYDRAULIC TAPPETS • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities • Billet body • Increased roller width • Roller perpendicularity held to 0,0002” • Hand-honed hydraulic unit cavity • Dynamic load capacities increased over 30% • Lubrication capacities for hydraulic unit and valve train (top end) increased 10% • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling • Sold each PART # DESCRIPTION FOR 91-99 XL, 94-99 BUELL; REPL. OEM #18526-89 DS-194278 Std. (0,9035”) FOR 86-90 XL; REPL. OEM #18523-86 DS-194107 Std. (0,8425”) BIG AXLE ™ POWERGLIDE ™ TAPPETS • Micro-finish bore allows a running fit of 0,0002” • Big Axle ™ rollers are designed around three working parts • The outer wheel/​roller has a 27% greater wall size – less harmonic distortion for better tracking of cam lobe • Pin bearings are decreased in size by 12%, which increases rpm for more precise tracking • Axle size is increased 36% and doubles as the inner race, so the pin bearing and complete roller assembly now rotate around the axle instead of an inner race, eliminating all possible movement in and around the axle • Sold each PART # DESCRIPTION FOR 17-21 M-EIGHT, 99-17 TWIN CAM, 00-21 XL (EXCEPT 21 SPORTSTER S/RH 1250S), 09-12 XR 1200 AND 00-09 BUELL 0929-0046 Standard 0929-0047 +0,002” oversize PART # DESCRIPTION FOR 86-90 XL AND 87-90 BUELL 0929-0043 Standard POWERGLIDE ™ STEADY ROLL TAPPETS • The same Powerglide ™ advantage (oil-fed axle, billet steel body, precision-fit hydraulics), but now incorporates a Steady Roll bronze bushing in place of the needle bearing roller • These tappets have undergone extensive development to increase load, lubrication, hydraulic and life capacities • Billet body • Increased roller width • Roller perpendicularity held to 0,0002” • Hand-honed hydraulic unit cavity • Dynamic load capacities increased over 30% PART # DESCRIPTION 0929-0015 For 17-21 M-Eight, 99-17 Twin Cam, 00-21 XL/XR (except 21 Sportster S/RH 1250S), 1200 and 00-09 Buell PART # DESCRIPTION DS-194347 For all 91-99 XL and 94-99 Buell (0,9035” OD); repl. OEM #18529-89 HYDROSOLID TAPPETS • Perform like a hydraulic tappet up to 5500 rpm, then turn into a solid tappet • When they turn into solid tappets, it adds approximately three to six more usable horsepower • Prevents hydraulic pump at high rpm PART # DESCRIPTION FOR 17-21 M-EIGHT 0940-2010 Tappet cover kit; black 0940-2011 Tappet cover kit; chrome PART # DESCRIPTION FOR 17-21 M-EIGHT (CONT) 0940-2012 Tappet cover and pushrod kit; black 0940-2013 Tappet cover and pushrod kit; chrome LOW-PROFILE BILLET TAPPET COVERS/​PUSHROD COVER KITS • Made from 6061 billet aluminum • Covers were designed to be installed with Twin Cam pushrod covers, they will not work with standard M8 pushrod covers • JIMS tappet covers have a sleek new look and are 1 / 2 ” lower than stock, making pushrod adjustment easy to do • PART #s 0940-2010 and 0940-2011 include gaskets and screws • Lubrication capacities for hydraulic unit and valve train (top end) increased 10% • Lubrication capacities for the roller, cams and cam bearings have increased 100% for increased cooling • Sold each • Tappet covers with billet pushrod covers are available for the ultimate train cover upgrade (PART #s 0940-2012 and 0940-2013); includes tappet covers, smooth billet pushrod cover and all necessary gaskets, O-rings and screws • Sold each NOTE: Require the use of adjustable pushrods. DS-194347 0929-0015 0940-2013 0940-2010 0929-0046 0929-0043 0929-0014 DS-194107 DS-194278
       PCI_DSS

       SSL

       BigTwin Motorcycles Group bei Facebook
box_end_left pexel_transparent box_end_right
  BigTwin Motorcycles GroupTM - Heidenheimer Str.83 - 89537 Giengen / Brenz - Tel: +49 (0)7322/919526  
ShopSystem V.4.0 - 2020 by BigTwin Motorcycles GroupTM
custom, chrome, motor, motoren, power, kits, kolben, kolbenkits, nockenwellen, ölpumpen, diverse