CCE 1/4" Belt Pulley and Sprocket Spacer

13.43 for more details check www.custom-chrome-europe.com WHEELS, TIRES & BRAKES APPAREL HAND CONTROLS LIGHTING ELECTRICAL EXHAUST INTAKE ENGINE GASKETS TRANNY & CLUTCH DRIVELINE WHEELS, TIRES & BRAKES FRAMES FORKS & SHOCKS SHEETMETAL INSTRUMENTS & GAUGES LUBRICANTS & CHEMICALS TOOLS & EQUIPMENT SEATS & TOURING FOOT CONTROLS Dual Flange Wheel Assemblies Chrome or polished stainless steel spokes are laced to chrome rims and hubs. The 16" wheel assemblies feature our European-manufactured chrome 16" rims. The hubs feature thicker spoke flanges, and rotor flanges held to .001" runout. All hubs accept any stock sprocket/rotor or rotor/rotor combination for greater flexibility when building custom wheel combinations. They include all internal spacers, seals and washers, and bearing end play is set at the factory. Wheel assemblies will bolt-on to most models from 73-85. Note: Wheels fit the rear of most models from 86-99 when installed with a CC #19722 spacer (OEM 40932-81) between the belt pulley or sprocket and the hub. Front Axle Spacer for FXWG Models Replacement right or left axle spacers for FXWG models. May also be used when fitting other wheels (such as CC #’s 19687 or 19694) to late model front ends.Sold in packs of 5. 19696 80-83 left spacer (repl. OEM 41594-73) 19697 83 right spacer (repl. OEM 41607-83) Chrome Dual Flange Wheel Hubs Complete chrome hub assemblies for the front or rear of most Harley- Davidson models from 73-99. 7/16" or 5/16" holes in both flanges, all internal components and bearing preload set at the factory. 19678 Front or rear hub with 7/16" holes in both flanges for models from 73-85 (repl. OEM 43540-73A) 19776 Rear hub with 7/16" Pulley /Sprocket side flange holes & 3/8" Brake Rotor side flange holes for models from 86-99 (repl. OEM 40976-86) 19800 Front hub with 5/16" holes in both flanges (repl. OEM 43663-80A) 19718 Rebuild kit (includes bearings, cones, seals, spacers, washers and retaining rings) 26051 Bearing and cone (repl. OEM 9052) 26138 Bearing only 26137 Cone only 19682 Outer bearing spacers (repl. OEM 41196-73) sold in pairs 54331 Rubber oil seals (repl. OEM 47519-58) pack of 10 54207 Rubber oil seal (repl. OEM 47519-83A) pack of 10 19684 Hub washers (repl. OEM 43559-73) sold in pairs 19685 Hub retainer rings (repl. OEM 11027) sold in pairs 19686 Spacer 4.420" (repl. OEM 43601-78) Orange 19688 Spacer 4.434" (repl. OEM 43602-78) Yellow 19689 Spacer 4.448" (repl. OEM 43603-78) White Belt Pulley and Sprocket Spacer This part was used on many Big Twin models from 80-85. It was most commonly used on belt drive models to achieve the proper spacing of the rear belt pulley to the wheel. This spacer is required for use on our rear wheels when used in many different applications. Fits Big Twin and Sportster models. 19722 Replaces OEM 40932-81 Replacement Parts for Front Hubs on Models 74-77 19594 Left bearing spacer (repl. OEM 43548-74) 19693 Rebuild kit (includes bearings, cones, seals, and left-hand spacer) 54332 Steel oil seal (repl. OEM 47519-72) pack of 10 26051 Bearing and cone (repl. OEM 9052) Chrome Front Hubs Include the chrome hub and all of its internal components with properly spaced bearings. For all Sportster, FX and FXR models with dual disc narrowglide front ends from 77-83 19710 Complete hub assembly (repl. OEM 43600-78) 19714 Left bearing spacer (repl. OEM 43488-77) 19715 Spacer 2.564" (violet) replaces OEM 43623-78 19716 Spacer 2.550" (pink) replaces OEM 43624-78 19717 Spacer 2.536" (gold) replaces OEM 43625-78 19693 Rebuild kit (includes bearings, cones, seals, and left-hand spacer) 54332 Steel oil seal (repl. OEM 47519-72) pack of 10 54207 Rubber oil seal (repl. OEM 47519-83A) pack of 10 26051 Bearing and cone (repl. OEM 9052) *Note: Modifications to caliper pin and additional rotor spacers may be required for clearance. For Sportster, Dyna Glide, FX and FXR models (except FXLR) with single or dual disc narrowglide front ends from 84-99 19709 Complete hub assembly (repl. OEM 43619-84) 19585 Right bearing spacer (repl. OEM 43358-83) 19715 Spacer 2.564" (violet) replaces OEM 43623-78 19716 Spacer 2.550" (pink) replaces OEM 43624-78 19717 Spacer 2.536" (gold) replaces OEM 43625-78 54332 Steel oil seal (repl. OEM 47519-72) pack of 10 54207 Rubber oil seal (repl. OEM 47519-83A) pack of 10 26051 Bearing and cone (repl. OEM 9052) Chrome Rear Hub Assembly Complete wheel hub assembly includes the chrome hub and all of its internal components with properly spaced bearings. The hub fits the front or rear wheel of all FL models from 67-72 and the rear of FX mod- els from 71-72. 19554 Complete hub assembly (repl. OEM 43540-67A) 19559 Bearing spacer (repl. OEM 43549-67) 19560 Bearing locknut (repl. OEM 43542-67) 19562 Hub spacer (repl. OEM 41196-55) 54324 Rubber oil seal (repl. OEM 41210-55) Sold in packs of 10 26133 Hub bearing (repl. OEM 43577-67)