Part Description
Feuling, Race Series oil pump & cam plate kit. Oil cooled
Will Increase oil pressure; scavenge volume and engine oil flow. This offers quieter; smoother engine operation and lower oil temperatures. • Quieter and smoother engine operation• 27% more pressure and scavenge gear volume over stock• 42% more scavenge volume through port sizing; matched passages and holes to the engine case• 46% more oil volume to the crankshaft and connecting rod bearing• 15-25 degree cooler engine temperatures• 15-30 degree cooler oil temperatures • 10-30 more PSI of oil pressure• Reduces wet sumping; blow by and oily air cleaners• Test results show 2 HP gain and 2 ft/lbs. of TQ gain to the rear wheel on Milwaukee Eight• NOTE: FEULING test results show as much as 50% reduction of engine sump oil level.RACE SERIES kits include FEULING'S HIGH FLOW billet cam plate made from 7075 aluminum which is 50% harder and stronger than the factory cam plates. FEULING increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil port holes throughout the cam plate to the port holes in the engine case which increases engine oil flow to the lifters; piston cooling jets; crankshaft and rod bearings.The FEULING oil pumps are bench tested; the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi. The increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oil
