Part Description
Cam Kit- 487 Reaper Chain Drive Camshaft, Cam Installation Kit and Race Series Lifters are included in this kit.
- 487 Reaper Camshaft.
- Bolt in.
- Chain Drive.
- 38° overlap.
- RPM range 2,250 - 6,1000.
- Camshaft for 114 and 117" engine.
- Responds very well to increased bore and or compression .
- Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock.
- Cam specs measured on the lifter @ 0.050 lift with 1.61 rocker arm ratio..
- Cam Installation Kit.
- Includes cam bearing, cam/crank hardware and gasket/O-ring kit.
- Allows for installation of the factory one piece pushrods or optional Feuling® heavy duty HP+® 0.165 wall one piece pushrods.
- Race Series lifters.
- Hydraulic lifters have a full 0.200 of total travel.
- Designed with a slower bleed down rate to handle heavy valve spring pressures.
- Increase engine RPM before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the Milwaukee Eight front exhaust camshaft lobe flange.
- Made in the USA.
- Heavy duty one piece pushrods are highly recommended..
- Feuling® fastener kit is recommended to help prevent cylinder head cracking..
- A high flow exhaust system and air cleaner is highly recommended for optimal performance..
- High Lift valve springs are required on stock cylinder heads, Screamin Eagle cylinder heads have high lift valve springs but will need to be verified..
- Feuling® does not recommend tuning beyond stock emissions standards.Not for VVT engines.Includes:• Chain Drive Camshaft• Race Series® Lifters• Cam Installation Kit"
