Part Description
2000I PC Programmable Electronic Ignition Kit- Completely self-contained so entire unit hides under the cam cover for a clean look on custom bikes.
- Single-fire operation down to zero rpm for easier cranking and kicking.
- Will operate in all combinations of single-fire or dual-fire with single-plug or dual-plug heads.
- Ten advance curves cover a broad range of engine builds and riding styles.
- Engine over-rev protection, adjustable from 6000 to 7500 rpm.
- Adjustable timing retard for nitrous and turbo applications.
- VOES indicator lets you monitor VOES switch at a glance.
- Built-in tach driver can be used to activate shift lights, auto-shifters and other accessories.
- Easy static timing with built-in timing indicator.
- Intelligent over-current/short-circuit protection.
- Active dwell control.
- Over-voltage protected against momentary spikes.
- Data recording includes total engine hours, time wide-open throttle, longest time operating at wide-open throttle, max rpm, seconds near rev limit and number of engine starts.
- PC programmability makes possible an eight-point, fully definable, wide-open throttle curve and a fully definable part throttle curve, rev limit programmable in 50 rpm steps, programmable dead-cranking revs 0-5, rear cylinder offset, total of +/- 10°, programmable rev limiter, security lock out (pin # activated), single or dual fire.
- Programming and downloading data and graphs from module requires proper programming kit (includes CD, cables and instructions).
- Pigtail connector enables the user to connect the ignition to a PC to either download recorded info from the ignition or program their own power curves, rev limits, dead revs or rear cylinder off-set timing; connector remains on bike.
- Made in the USA.
- Not for fuel-injected models.
- Programming kit is not necessary to use all selectable functions of the current ignition.
