19 19.38 EDITION 50 Cylinder Torque Plates Late model aluminum cylinders cannot be accurately honed without using torque plates. These plates simulate operating stress conditions when boring or honing aluminum cylinders. These plates easily adapt to conventional boring bars or a Sunnen type honing machine. The JIMS® torque plates are drilled precisely for multiple applications use, and can accommodate various bore sizes, with stock or oversize big bores. These kits are lasered lettered for ease of use with torquing sequence and most sets don’t require removal of ring dowels. PART# FITMENT FIELD OF APPLICATION FITMENT NOTE 20291 99-17 Dyna, 0017 Softail, 99-16 Touring, 09-16 Trike JIMS Twin Cam Big Bore Cyl’s, H-D, Bigger Bore Cyl’s with OEM bolt pattern 99 to present For 4.00“ up to 4.060“ Bore 20806 66-84 FL Shovel, 7184 FX Shovel, 85-94 FX Model, 91-98 Dyna, 84-99 Softail, 86-98 Touring, 86-20 Sportster For 3.4375” - 4” Bore, For Sportster or Buell must order Torque Plate Bolts seperately CCE# 20807 928159 18-24 Softail, 17-24 Touring, 17-24 Trike Qty.: 1 Flywheel Timken Bearing Remover Used to remove Timken bearings from sprocket shafts without re-moving shafts from the flywheels. Unit: Each , Qty.: 1 PART# FITMENT FITMENT NOTE 20459 55-65 Panhead, 66-84 FL Shovel, 71-84 FX Shovel, 85 FX Model, 84-85 Softail 55-02 Aftermarket Flywheels 22303 86-94 FX Model, 91-02 Dyna, 86-02 Softail, 86-02 Touring Inner Cam Bearing Installer Use this tool to press in the two inner cam bearings. Designed to press from letter side of the inner cam bearings, by putting all the pushing pressure to the very outer wall of bearing shell, eliminating damage to the bearings, cam and cases. This tool will stop at the case and set the bearing depth to .023“ to .028“ below the case surface. Use with CC #622032. 622038. Part#: 622038 , Fitment: 99-17 Dyna, 00-17 Softail, 99-16 Touring, 09-16 Trike , Position: Inner , Unit: Each , Qty.: 1 Sprocket Shaft Seal Installation Tool Use to install H-D No. 9028 Timken bearing or H-D No. 24004-03 roller bearing Inner race onto the sprocket shaft. Part#: 20687 , Fitment: 69-84 FL Shovel, 71-84 FX Shovel, 85-94 FX Model, 91-05 Dyna, 84-06 Softail, 86-06 Touring , Fitment Note: In conjunction with 20116 , Unit: Each , Qty.: 1 Torque Plate Bolt Kit Required to accurately bore late-model aluminum cylinders. Simulates stress deformation of installed cylinder. Drilled for multiple applications up to a 4“-bore. The plates for Twin Cam 88 models also fit Screamin‘ Eagle big bore cylinders. Optional bolts are available for use with Evolution Sportster and Buell cylinders. Part#: 20807 , Fitment: 86-20 Sportster, 97-02 M2, 97-98 S1, 97-99 S3, 99-02 X1, 03-10 XB , Description: For Sportster and Buell use with CCE# 20806 , Unit: Pack , Qty.: 4 20807 20291
RkJQdWJsaXNoZXIy ODQ0NDEw