MCS Catalog Vol. 18 by BMG

THEY DON'T COME ANY BIGGER! The Motorcycle Storehouse ‘V-Twin’ catalog has evolved to become the most comprehensive H-D aftermarket catalog available today. Boasting over 55,000 replacement and custom parts and accessories from more than 250 brands, Volume 18 caters for V-Twin motorcycles from as far back as 1912, all the way through to today’s Revolution Max equipped models… That’s more than a century of coverage!

0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 1 Index......................................................................................1 - 32 MCS Fanshop......................................................................33 - 36 01 | Windshields and bodyparts.............................................37 - 68 02 | Speedo and dash.............................................................69 - 106 03 | Seats and sissy bars......................................................107 - 182 Luggage..........................................................................183 - 234 04 | Frame and chassis........................................................235 - 284 05 | Suspension, shocks and forktubes............................285 - 362 06 | Wheels............................................................................363 - 432 07 | Brake...............................................................................433 - 496 08 | Fenders...........................................................................497 - 534 09 | Gas tanks and parts..................................................... 535 - 574 10 | Motorparts - Lower end...............................................575 - 670 Motorparts - Top end...................................................671 - 762 11 | Gaskets and seals..........................................................763 - 816 12 | Intake.............................................................................. 817 - 862 Air cleaners....................................................................863 - 914 13 | Driveline - Transmission..............................................915 - 986 Driveline - Clutch.........................................................987 - 1020 Driveline - Primary....................................................1021 - 1072 Driveline - Secondary...............................................1073 - 1090 14 | Exhaust.......................................................................1091 - 1164 15 | E lectrical - Ignition, wiring, starters, regulators and batteries..........................................1165 - 1296 Electrical - Headlamps and spotlamps..................1297 - 1326 Electrical - Turn signals............................................1327 - 1382 Electrical - Taillights, license plate brackets and auxiliary lights...................................................1383 - 1434 Electrical - Horns.......................................................1435 - 1442 16 | Forward controls and footpegs..............................1443 - 1504 17 | Handlebars.................................................................1505 - 1548 Risers..........................................................................1549 - 1568 Grips............................................................................1569 - 1600 Handlebar controls and cables...............................1601 - 1646 Mirrors........................................................................1647 - 1674 18 | Oil filters, tanks and parts.......................................1675 - 1696 19 | Oil and chemicals......................................................1697 - 1726 20 | Fasteners....................................................................1727 - 1792 21 | Miscellaneous............................................................1793 - 1830 Fortunes in Formulas...............................................1831 - 1833 Bikes............................................................................1834 - 1840 WINDSHIELDS INDEX SPEEDO SEATS & LUGGAGE RACKS FRAME / CHASSIS SUSPENSION / FORKTUBES WHEELS BRAKE FENDERS GAS TANKS MOTORPARTS GASKETS INTAKE TRANSMISSION & DRIVELINE EXHAUST ELECTRICAL & LIGHTS FORWARD CONTROLS & FOOTPEGS HANDLEBARS, CABLES & MIRRORS OIL TANKS OIL & CHEMICALS FASTENERS MISCELLANEOUS MOTORCYCLESTOREHOUSE.COM For the latest pricing, availability, and new products CE approved, fully compliant with EC rules ECE approved! Products featuring this logo come with ECE approval. New parts will feature the ‘NEW’ logo. Part numbers are placed on a yellow high-lighted background. Approval is found on these parts. ABE approval is found on these parts. Proudly Made in Europe! Our increasing number of European Suppliers are identified with this logo.

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous MOTORCYCLE STOREHOUSE FANSHOP 33 AFTERMARKET PARTS & ACCESSORIES FOR CUSTOM MOTORCYCLES / MOTORCYCLESTOREHOUSE.COM MOTORCYCLE STOREHOUSE, 1982 TRUCKER CAP Black/grey. One size fits all. 593710 MOTORCYCLE STOREHOUSE, SERVICE TRUCKER CAP Black denim. One size fits all. 593711 MOTORCYCLE STOREHOUSE, DEALER TRUCKER CAP One size fits all. 593712 MOTORCYCLE STOREHOUSE T-SHIRT LOGO CHEST Black S M L XL 2XL 3XL 947787 947788 947789 947790 947791 947792 MOTORCYCLE STOREHOUSE T-SHIRT LOGO BACK Black S M L XL 2XL 3XL 947795 947796 947797 947798 947799 947800

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous MOTORCYCLE STOREHOUSE FANSHOP 34 NEW PRODUCTS ADDED WEEKLY AT / MOTORCYCLESTOREHOUSE.COM MOTORCYCLE STOREHOUSE BALL POINT PEN 995710 200102 LIGHT BOX SIGN WITH MOTORCYCLE STOREHOUSE LOGO Brightly illuminated yellow with black MCS logo. Great for shop use above the counter, against the wall or any other area you can think of that is ready for some illumination the MCS way. Dimensions: 10cm deep x 20cm high x 100cm wide. 200102 Light box sign MOTORCYCLE STOREHOUSE DEALER SIGN Show 'm you're the real deal! Now available in a stylish 3D embossed painted steel dealer sign that will compliment any shop. Black, yellow & white painted steel. Dimensions: 20 cm high x 60 cm wide. 569851 MCS Dealer Sign 569851 MOTORCYCLE STOREHOUSE OG LOGO BADGE 559601 Black 559602 Yellow MOTORCYCLE STOREHOUSE, COFFEE CUPS Sip your coffee in style and do it sustainable. Manufactured from cardboard with a coating of green PE with a sugar cane base. 599668 180cc MOTORCYCLE STOREHOUSE, BARRIER TAPE Set your perimeter with this Yellow / Black barrier tape on a crime scene, bike show or anything you can think of. With the Motorcycle Storehouse logo, showing your good taste. Dimensions: 75mm wide x 250 meter long. 599204 250 meter long 599668 599204

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous MOTORCYCLE STOREHOUSE FANSHOP 35 AFTERMARKET PARTS & ACCESSORIES FOR CUSTOM MOTORCYCLES / MOTORCYCLESTOREHOUSE.COM 300007 MOTORCYCLE STOREHOUSE BANNERS 100000 MCS Banner (150cm x 65cm) 300016 MCS Banner (121cm x 45cm) 300007 Event banner (400cm x 150cm) MOTORCYCLE STOREHOUSE STICKERS 300000 MCS Logo (400mm x 100mm) 300003 MCS Logo (170mm x 55mm) 300005 MCS Business Hours (165 x 250mm). Static cling 300009 Authorized Dealer. 165 x 150m. Medium 300011 MCS logo. Small 170 x 85mm 300012 MCS Authorized Dealer Window Decal. 165 x 150mm 300014 MCS logo. Black, yellow print. 170x55mm 300018 MCS A5 sticker sheet. 148 x 210mm MOTORCYCLE STOREHOUSE BAG 200101 MCS carrier bag. Recyclable 300012 300012 300014 300011 300009 300005 300003 300000 300018 MCS 'SIZE IT' BOLT GAUGE TOOL Identify bolt diameter of US bolts from #4 to 1" and Metric bolts from M3 up to M22. Identifies US nuts from #6 up to 5/8". Includes a 3-D thread checker, which will identify thread pitch of US bolts from 2.5 to 40 windings and Metric bolts from .70 to 2.5 windings. 985236 Bolt, nut & thread gauge 985236 200101

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous MOTORCYCLE STOREHOUSE FANSHOP 36 NEW PRODUCTS ADDED WEEKLY AT / MOTORCYCLESTOREHOUSE.COM MCS, FIRST AID MOTORCYCLE KIT Especially composed for motorcycle use. Required by law to carry on-bike in many European countries. Includes First Aid Instructions, insulation blanket, dressings, bandages, self-adhesive plaster, gloves and scissors In accordance with DIN 13167. Approximate dimensions. 15cm wide x 12cm high x 5cm deep. Weight 247 grams. 300017 MCS First Aid Kit MCS V-TWIN CATALOG: THE BIG ONE! (200001) The most comprehensive H-D aftermarket catalog available anywhere; nobody offers a wider selection of parts for custom motorcycles! Jam-Packed from cover to cover with over 55.000 replacement custom parts and accessories, technical drawings and detailed fitment info you can depend on. MCS WORKSHOP: THE GEEKY ONE! (200050) Your favourite tools catalog is full of workshop goodness, with individual brand chapters and dedicated sections for those specialist V-Twin items, clothing and workshop essentials too. Plus, with our ‘quick tool index’ we’re confident you’ll spend less time searching, and more time wrenching. 300017 MOTORCYCLE STOREHOUSE, A4 NOTEPAD This is the one to have when making notes that matter. With its bright yellow color and cool Shovelhead illustration, it'll stand out in the crowd and stay looking fresh. Dimensions 210mm x 297mm, 50 pages of 80 grams lined paper on gray hardback with a 170 grams cover sheet. 914965 A4, 50 pages 914965

01 WINDSHIELDS & BODYPARTS AFTERMARKET PARTS & ACCESSORIES FOR CUSTOM MOTORCYCLES

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 38 NEW PRODUCTS ADDED WEEKLY AT / MOTORCYCLESTOREHOUSE.COM Low 926071 Tall 926132 Standard 926070 Standard 926133 Low 926073 Ultra Low 926136 Ultra Low light tinted 926135 The Revolution for your Dresser! Beating the Von Karman Vortex! Ultra Low 926072 N.C. VSTREAM® WINDSHIELD The advanced 'V' shape and dimensional contours of the VStream® windshield pushes turbulent wakes, typically referred to as the Von Karman Vortex, out and away from the side of the rider's helmet so the rider can sit in a calm and quiet air pocket. This increases comfort not just for the rider but will even be beneficial to the passenger. The VStream® is manufactured from Polycarbonate which makes it maximum impact resistant, and the additional Quantum® surface hard coating makes this windshield superior scratch, abrasion and aging resistant. Re-use OEM hardware. 96-13 FLHT, FLHX Clear Dark Light tint 926068 -- -- Tall (17") 926070 -- -- Std (14") 926073 926071 -- Low (10") -- 926072 -- Ultra low (6.75") 98-13 FLTR Road Glides Clear Dark Light tint 926074 -- -- Tall (18") 926075 -- -- Std (15.25") -- -- 926305 Low (12") -- 926076 -- Low (9.25") 14-23 FLTR Road Glides Clear Dark Light tint 926140 -- -- Tall (16") -- -- 926141 Std (12.50") -- 926142 -- Low (9.00"). 14-23 FLHT, FLHX, Trikes with Batwing fairing Clear Dark Light tint 926132 -- -- Tall (14.5") 926133 -- -- Std (11.5") -- -- 926134 Low (9.6") -- 926136 926135 Ultra low (7.6")

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 39 AFTERMARKET PARTS & ACCESSORIES FOR CUSTOM MOTORCYCLES / MOTORCYCLESTOREHOUSE.COM BEADED EDGE LOW - UP LOW - UP PLAIN EDGE MID - UP MID - UP NATIONAL CYCLE, VSTREAM® WINDSHIELD FOR PAN AMERICA Taller and wider than the OEM shield for better protection. Includes special wind deflectors, positioned on both sides of the screen. The advanced 'V' shape and dimensional contours of the VStream® windshield pushes turbulent wakes, typically referred to as the Von Karman Vortex, out and away from the side of the rider's helmet so the rider can sit in a more calm and quiet air pocket. This increases comfort, not just for the rider but will even be beneficial to the passenger. The VStream® is manufactured from 2mm polycarbonate which makes it maximum impact resistant, and the additional Quantum® surface hard coating makes this windshield superior scratch, abrasion and aging resistant. OEM hardware must be reused for the VStream®, a special hardware kit is included for the wind deflectors. Available in 'clear' with either a plain edge or an E43R EU-compliant beaded edge. Offered in a 'low' 13.75" (34.9cm) and 'mid' 16.38" (41.6mm) high version. 21-23 Pan America RA1250/S Low Mid 948844 948845 With beaded edge 948846 948847 With plain edge 948844 948847 1 Centerline measurement from top of screen to top of fairing edge 2 Centerline measurement from top of screen to bottom edge of screen 3 Measured from top of stock headlight shroud to top of windscreen 4 Measured from the top of the fuel tank straight up to a point horizontally level with the top of the screen 5 Measured from the top of the ignition switch housing straight up to a point horizontally level with the top of the screen All widths are measured in a straight horizontal line across the back of the screens at their widest point.

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 40 NEW PRODUCTS ADDED WEEKLY AT / MOTORCYCLESTOREHOUSE.COM N.C. MOHAWK™ WINDSHIELD A descendant of the Flyscreen®, with a larger and more functional V-profiled screen where the added height & width adds up to more comfort without the dreaded bulk. Hardware is identical to the Flyscreen® with fully adjustable fork tube mounted hardware. All come with a 95% dark grey FMR hard coated Lexan® polycarbonate for optimum scratch resistance and an almost unbelievable strength and impact resistance. Dimensions: 9.25" high (23.5cm) x 11.75" wide (29.8cm). Note: Special version is available for headlamp mount but is otherwise identical. Fits up to 43mm fork tubes 569895 Straight bracket, chrome hardware 569896 Straight bracket, black hardware 569897 Curved bracket, chrome hardware 569898 Curved bracket, black hardware Fits 44-51 mm fork tubes 569903 Straight bracket, chrome hardware 569904 Straight bracket, black hardware 569905 Curved bracket, chrome hardware 569906 Curved bracket, black hardware Fits 52-56mm fork tubes 569901 Curved bracket, chrome hardware 569902 Curved bracket, black hardware Headlamp mounted Installs to the headlamp of most naked bikes with open forks and exposed headlamps. 569907 With chrome hardware 569908 With black hardware 569895 With straight bracket 569907 Headlamp mounted 569898 With curved bracket 909566 909567 N.C. FLYSCREEN® Fork mounted screen with approval. Light tinted screens are fabricated of 3mm thick high impact acrylic and the dark tinted screens of 3mm thick FMR hardcoated Lexan polycarbonate with optimum scratch resistance, impact resistance and strength. Designed to take the direct wind force away from your chest. Comes with a fully adjustable fork tube mounting system with flush-fit countersunk bolts. 8.5" (21.6cm) high from the top of the cut-outs and 9.25" (23.5cm) wide. Fits H-D models without triple tree covers. Includes chrome or black hardware. Fits up to 43mm fork tubes Chr. Black 909566 572259 Light 26% tint. High impact acrylic 909567 572260 Dark 95% tint. Polycarbonate Fits 44-51 mm fork tubes Chr. Black 572267 572269 Light 26% tint. High impact acrylic 572268 572270 Dark 95% tint. Polycarbonate N.C. WAVE® WINDSHIELDS National Cycle's Wave® shields are a combination of innovative custom styling where functionality and value is uncompromised. Wave® shields feature the Quantum® hard coated 4.5mm thick polycarbonate material, known as the strongest, highest quality optics and most scratch resistant windshield material in the world today. If you like this style, the Wave® is made for you. 96-13 FLHT, FLHX 926082 Clear, 10" tall 926083 Light tinted, 7.75" tall 926084 Dark tinted, 5.25" tall 98-13 FLTR Road Glide 926086 Light tinted, 8.25" tall 926087 Dark tinted, 6.25" tall

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 41 AFTERMARKET PARTS & ACCESSORIES FOR CUSTOM MOTORCYCLES / MOTORCYCLESTOREHOUSE.COM 926015 926015 926128 926116 Windshield heights Windshield mounting Quickset4 mounting types Open forks Covered forks Side mount 926117 QUICKSET4™ MOUNT KITS N.C. SPARTAN® WINDSHIELDS A very effective full size, 18" wide and great value for money. A Quick Release windshield with a stealth black powdercoated stainless steel frame. Made from 4mm thick clear Quantum® hard coated polycarbonate material. To date this remains the best windshield material in the world and very safe, it will literally resist a baseball bat whacked at full force... even a shotgun blast with birdshot from a few meters away. Extremely high impact protection for your safety! Note: Quick Set 4™ mount kits must be purchased separately FLSTC, FLSTF models 926112 16.25" high 926109 18.50" high FX models 926116 16.25" high 926110 18.50" high XL Sportster models 926111 16.25" high 926117 18.50" high THE 'QUICKSET 4™' MOUNT KITS Quick Set 4™ mount kits are identical for SwitchBlade®, Spartan® and Stinger™ windshield. They are necessary and must be ordered separately. These mount kits will let you install your shield, or detach it for some wind in your hair, in just 4 seconds! When the windshield is off you will hardly notice the Quickset-4 mount kit. All mount kits are model specific for a hassle free installation. Note: Quickset™ mount kits are required for installation of SwitchBlade®, Spartan® or Stinger™ windshields and must be ordered separately. Note: These mount kits are not included in the windshield kit and must be ordered separtately. 926005 86-17 FLSTC models; 00-17 FLSTF, FLSTFB, FLSTFBS; 05-17 FLS, FLSS, FLSTN (No OEM light bar) 926006 86-17 FLS, FLSS, FLSTC, FLSTF, FLSTFB, FLSTFBS; 2006 FLST; 93-96 FLSTN (With OEM light bar) 926015 00-07 FXSTD Deuce (excl. FXSTDSE) 80-86 FXWG 86-15 FXST, FXSTC, FXSTB 93-05 FXDWG 926022 91-05 Dyna (excl. FXDWG, FXDXT) 8 8-20 XL (excl. XL1200CX/T/X/XS; 11-20 XL883L, 1200C) 926065 94-16 FLHR Road King models 926052 18-20 Softail FXBB, FXLR; 20-23 FXST; 21-23 FXBBS 0 6-17 Dyna (excl. FLD, FXDF, FXDSE, FXDWG; 16-17 FXDL/S) N.C. STINGER™ WINDSHIELDS A free flowing design which does a remarkable good job for its size. Relatively small and very fluid lines give you're bike an attitude you never thought possible. The clean Quick Set 4™ mounting material is hardly noticeable, not disturbing and it will let you quick-detach the windshield in just 4 seconds! FMR hard-coated polycarbonate for the ultimate in windshield quality combined with the 25% or 95% dark tint for the mean and lean look. Since all Stinger™ windshields are vertically adjustable by adjusting rake. Its your choice to slam it back, for the lowest profile, or rake it up for maximum wind protection. Note: Quickset 4™ mount kits must be ordered separately. Note: Listed measurements are made from the top of the headlight cut-out to the top of the winshield in the fully raked forward position. Width is measured in a straight line, at the back of the shield, at its widest point. 86-90 FLST; 87-16 FLSTC; 90-16 FLSTF/B; 05-16 FLSTN; 12-17 FLS/S Softail models 926126 Windshield. 12.5" high x 18.25" wide, 95% dark tint 926005 Quickset 4™ mount kit 06-17 FX Dyna models (excl. FLD, FXDF, FXDSE, FXDWG); Softail: 18-20 FXBB, FXLR; 21-23 FXBBS; 20-23 FXST 926125 Windshield. 10.5" high x 17" wide, 95% dark tint 926052 Quickset 4™ mount kit 88-20 XL (excl. XL1200CX/T/X/XS and 11-20 XL883L, 1200C); 91-05 Dyna (excl. FXDWG, FXDXT) Note: XL1200NS requires removal of headlight visor. 926128 Windshield. 13" high x 16" wide, 25% tint 926022 Quickset 4™ mount kit 926126

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 42 NEW PRODUCTS ADDED WEEKLY AT / MOTORCYCLESTOREHOUSE.COM 926017 N.C. SWITCHBLADE®, 2-UP® Full-size. Offers maximum windprotection during trips. Easy to detach or install. Just pop it off or pop it back on. Dimensions: Overall height 26.5" (67cm), height from cut-out to top 20" (51cm) for FL and 18.5" (45cm) for FX, overall width 23" (58.4cm). Note: Quickset 4™ mount kits must be ordered separately. Clear 926000 86-99 FLSTC 90-17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS 2006 FLST 93-96 FLSTN 926010 00-07 FXSTD Deuce (excl. FXSTDSE) 80-86 FXWG 86-15 FXST, FXSTC, FXSTB 93-05 FXDWG 926017 91-05 Dyna (excl. FXDWG, FXDXT) 88-20 XL (excl. XL1200CX/T/X/XS; 11-up XL883L, 1200C) 926060 94-16 FLHR Road King models 926039 18-20 Softail FXBB, FXLR; 20-23 FXST; 21-23 FXBBS 0 6-17 Dyna (excl. FLD, FXDF, FXDSE, FXDWG; 16-17 FXDL/S) Pop off the windshield and you're ready for a wind-in-your-hair midsummer night cruise. 926000 926010 The SwitchBlade® Quickset mount The 2-Up® SwitchBlade® on a XL Sportster. Who said XL Sportsters are no good for long trips? 926032 926034 926036 926000 Industry's first no-hassle 'ready before you know it' quick detach windshields! GONE... IN 4 SECONDS!!* SUPER FAST ON & OFF! THE 'QUICKSET4™' MOUNT KITS Quick Set 4™ mount kits are identical for SwitchBlade®, Spartan® and Stinger™ windshield. They are necessary and must be ordered separately. These mount kits will let you install your shield, or detach it for some wind in your hair, in just 4 seconds! When the windshield is off you will hardly notice the Quickset-4 mount kit. All mount kits are model specific for a hassle free installation. Note: Quickset™ mount kits must be ordered separately WHY A SWITCHBLADE®? * Detach or install in 4 seconds! * Industry's first quick detach windshield * Ultimate windshield material: Quantum® Polycarbonate * Polished Stainless Steel construction N.C. SWITCHBLADE®, CHOPPED™ If the 2-Up® is too large and the Shorty® too short the Chopped™ is the ideal choice. Classic short styling, with a trimmed lower profile. Just as easy to detach or install as other SwitchBlade® windshields. Just pop it off or pop it back on. Dimensions: Overall height 21.1" (54cm), height from cut-out to top 14.9" (38cm) for FL and 21.1" (54cm) and 13.6" (34.5cm) for FX. Overall width 22.2" (56cm). Note: Quickset 4™ mount kits must be ordered separately. Clear 30% tint 926032 926033 86-99 FLSTC 90-17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS 2006 FLST 93-96 FLSTN 926034 -- 00-07 FXSTD Deuce (excl. FXSTDSE) 80-86 FXWG 84-15 FXST, FXSTC, FXSTB 93-05 FXDWG 926036 926037 91-05 Dyna (excl. FXDWG, FXDXT) 88-20 XL (excl. XL1200CX/T/X/XS; 11-20 XL883L, 1200C) 926061 -- 94-16 FLHR Road King mode 926042 926043 18-20 Softail FXBB, FXLR; 20-23 FXST; 21-23 FXBBS 0 6-17 Dyna (excl. FLD, FXDF, FXDSE, FXDWG; 16-17 FXDL/S) THE MATERIAL SwitchBlade® windshields from National Cycle are made from a stainless steel construction, which is combined with their very best windshield material that is available today... Quantum®. The 4mm Polycarbonate used is identical to the Lexan® FRM Polycarbonate but the special Quantum® coating makes the difference. The Quantum® windshield material is 10x better scratch and abrasion resistant than the FRM coating, and has a 2x better resistant against weather & aging influences. The Quantum® coating is a recent process developed by National Cycle Inc. for windshield use.

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 43 AFTERMARKET PARTS & ACCESSORIES FOR CUSTOM MOTORCYCLES / MOTORCYCLESTOREHOUSE.COM Shown here the easy adjustable rake adjustments of the National Cycle SwitchBlade® Deflector™ screen 2-Up® Chopped™ Shorty® Deflector™ 926044 926047 926003 N.C. SWITCHBLADE®, SHORTY® Lower than the 2-Up®, and a bit narrower. Enough to take the windpressure of your chest with a classic styling. Easy to detach or install. Dimensions: Overall height 19" (48.3cm), height from cutout to top 13" (33cm) for FL and 11.5" (29cm) for FX, overall width 18.5" (47cm). Note: Quickset 4™ mount kits must be ordered separately. Clear 30% tint -- 926012 00-07 FXSTD Deuce (excl. FXSTDSE) 80-86 FXWG 84-15 FXST, FXSTC, FXSTB 93-05 FXDWG 926044 926045 06-17 FXDWG; 13-17 FXSB/SE 926046 926047 18-20 Softail FXBB, FXLR; 20-23 FXST; 21-23 FXBBS 0 6-17 Dyna (excl. FLD, FXDF, FXDSE, FXDWG; 16-17 FXDL/S) N.C. SWITCHBLADE®, DEFLECTOR™ Not the massive look, but still offering functional wind protection. A special Rake Adjust™ system enables you to fine tune the Deflector™ for maximum comfort. Easy to detach or install. Just pop it off or pop it back on. Dimensions: Overall height 14.5" (37cm), height from cut-out to top 12" (30.5cm), overall width 13.5" (34cm). Note: Quickset 4™ mount kits must be ordered separately. Clear 30% tint 926003 926004 86-17 FLSTC, FLSTF/B/BS; 2006 FLST; 05-17 FLS/S/TN 926013 926014 00-07 FXSTD Deuce (excl. FXSTDSE) 80-86 FXWG 86-15 FXST, FXSTC, FXSTB 93-05 FXDWG 926020 926021 91-05 Dyna (excl. FXDWG); 88-20 all XL models

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 44 NEW PRODUCTS ADDED WEEKLY AT / MOTORCYCLESTOREHOUSE.COM 926008 926007 926016 N.C. SWITCHBLADE®, CHROME WIND DEFLECTORS For SwitchBlade® windshields. Chrome plated steel. Reduced wind noise and turbulence. Height 31cm, width 10.8cm. Attaches to bike using the SwitchBlade® or Heavy Duty™ mount kit. 926007 86-17 FLST/C/F/FB/FBS, FLS, FLSS; 93-96 FLSTN; 10-12 FLSTSE 926016 84-15 FXST Std/Custom (excl. FXSTB) 08-11 FXCW/C 00-07 FXSTD Deuce 91-17 Dyna 88-20 XL N.C. SWITCHBLADE®, HOLDSTER™ The Holdster™ is a convenient way to store small items like cameras, maps, shades, gloves etc. during trips. Coated road-rugged synthetic leather which will not dry out and crack like leather does. Easy to handle with one hand opening and closing by a glove friendly velcro© system. 926008 Holdster™ for SwitchBlade® (excl. XL & 06-17 Dyna) 926015 926015 Quickset4 mounting types Open forks Covered forks Side mount QUICKSET4™ MOUNT KITS THE 'QUICKSET 4™' MOUNT KITS Quick Set 4™ mount kits are identical for SwitchBlade®, Spartan® and Stinger™ windshield. They are necessary and must be ordered separately. These mount kits will let you install your shield, or detach it for some wind in your hair, in just 4 seconds! When the windshield is off you will hardly notice the Quickset-4 mount kit. All mount kits are model specific for a hassle free installation. Note: Quickset™ mount kits are required for installation of SwitchBlade®, Spartan® or Stinger™ windshields and must be ordered separately. Note: These mount kits are not included in the windshield kit and must be ordered separtately. 926005 86-17 FLSTC models; 00-17 FLSTF, FLSTFB, FLSTFBS; 05-17 FLS, FLSS, FLSTN (No OEM light bar) 926006 86-17 FLS, FLSS, FLSTC, FLSTF, FLSTFB, FLSTFBS; 2006 FLST; 93-96 FLSTN (With OEM light bar) 926015 00-07 FXSTD Deuce (excl. FXSTDSE) 80-86 FXWG 86-15 FXST, FXSTC, FXSTB 93-05 FXDWG 926022 91-05 Dyna (excl. FXDWG, FXDXT) 8 8-20 XL (excl. XL1200CX/T/X/XS; 11-20 XL883L, 1200C) 926065 94-16 FLHR Road King models 926052 18-20 Softail FXBB, FXLR; 20-23 FXST; 21-23 FXBBS 0 6-17 Dyna (excl. FLD, FXDF, FXDSE, FXDWG; 16-17 FXDL/S)

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 45 AFTERMARKET PARTS & ACCESSORIES FOR CUSTOM MOTORCYCLES / MOTORCYCLESTOREHOUSE.COM NATIONAL CYCLE, 'VINTAGE' REPRODUCTION BEADED WINDSHIELD Way back, when the company was founded in 1937, National Cycle's original name was 'Nations Cycle'. This vintage windshield is a reproduction of the windshields that 'Nations Cycle' made during that time. The re-release of this windshield is authentic, complete with mounting hardware. The only difference is that the windshield is made from modern, virtually unbreakable, polycarbonate with the upper section treated with National Cycle's exclusive Lexan® hard coating for superior scratch resistance. This polycarbonate windshield material is much stronger than the original Pyralin plastic, but still the beaded edge and the steel reinforcement ring is used for a period correct appearance. An absolute great windshield for period-perfect restorations. 36-47 Knucklehead; 1948 Panhead 942228 Clear lower 942229 Red lower 942230 Blue lower 942231 Black lower 942228 942230 942229 942231

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 46 NEW PRODUCTS ADDED WEEKLY AT / MOTORCYCLESTOREHOUSE.COM NATIONAL CYCLE, 5-BOLT 'BEADED HEAVY DUTY™' WINDSHIELDS Top of the line authentic early style 3-piece windshield assembly in a 5-bolt pattern, with beaded edges. Combines classic styling with superior optics, scratch-resistance, durability and should not be mistaken with import products. National Cycle's windshield is manufactured from FRM hard coated clear Lexan® polycarbonate which is the highest quality motorcycle windscreen material available. Comes with a clear top window and a choice in lower windows colors. Note: Appropriate mounting kit must be ordered separately, except for FLHS and FLSTC models which can re-use stock windshield mounting hardware. *Note 2: For 87-93 FLHS models it is advised you order lower adjustable window style C separately for better fitment around the headlamp. Windshields, STD top window All 87-17 FL Softail; 80-83 FXWG and 93-05 FXDWG 516523 Clear lower 516529 Black lower 516527 Red lower 516528 Blue lower 60-84 FL and FLH models; 87-93 FLHS (*Note 2) 516531 Clear lower 516534 Black lower 516532 Red lower 516533 Blue lower Windshields, Peaked top window 49-59 FL models 915221 Clear lower 915220 Red lower Mounting kits Note that 87-93 FLHS models will not require additional mounting brackets. OEM brackets can be re-used. 513661 80-83 FXWG; 84-15 FXST/C/B; 93-05 FXDWG 513662 49-84 FL, FLH; 77-84 FLHS 513663 87-17 FLST models (excl. FLSTS). No hardware required on 86-90 & 2006 Heritage; 87-99 FLSTC and 93-96 FLSTN models, when equipped with a light bar Replacement top window 500026 For beaded Heavy Duty windshields 500044 Peaked 1949 style Replacement 5-bolt lower window Replacement or an optional color for all 3-piece 5-bolt Beaded Heavy Duty windshields. 513691 Clear 513694 Black 513692 Red 513693 Blue Optional chrome lowers Lower deflectors reduces turbulence. Installs to the motorcycle by using the SwitchBlade® or Heavy Duty windshield mounting kit. 926124 Chrome REPLACEMENT FOR OEM 7-BOLT BEADED WINDSHIELDS Parts are compatible with OEM windshields/hardware with the stock 7-bolt pattern hardware. Note: Will not fit National Cycle 5-bolt pattern windshields. Replacement top window 563896 Standard. For OEM 7-bolt pattern beaded windshield assembly 915222 Peaked. For OEM 7-bolt pattern beaded windshield assembly Replacement 7-bolt lower window Optional or replacement for all 7-bolt windshields. 563897 Clear 563900 Black 563899 Blue 563898 Red 563899 563898 563896 516529 516528 REPLACEMENT ADJ. LOWER WINDOWS Replacement or an optional color for all 3-piece National Cycle 5-bolt Heavy Duty™, Chopped Heavy Duty™ and Beaded Heavy Duty™ windshields and OEM 7-bolt windshields. For 80-up models (style A) Standard round lower window. 513668 Clear 513673 Light tint (Std repl. for Touring & Chopped) 513684 Black 513677 Red 513681 Blue For 60-84 FLH (style B) Early FL style notched lower window. 513666 Clear 513683 Black 513676 Red 513679 Blue For 87-93 FLHS (style C) FLHS style round lower window. 513667 Clear 513687 Black 513678 Red 513682 Blue For 49-59 FL (style D) Early Panhead FL-style replacement adjustable notched lower window. Replaces the lower center window on 1949-1959 OEM windshields. Also fits H-D with National Cycle Beaded Heavy Duty, Touring & Chopped windshields. 569876 Clear 569879 Black 569877 Red 569878 Blue 513681 (style A) 513683 (style B) 513678 569876 (style C) (style D) 915222 516523 516527 516529 516533 915221 915220

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 47 AFTERMARKET PARTS & ACCESSORIES FOR CUSTOM MOTORCYCLES / MOTORCYCLESTOREHOUSE.COM 508465 TOURING HEAVY DUTY™ 508465 508464 CHOPPED HEAVY DUTY™ 516889 516885 516884 CUSTOM HEAVY DUTY™ 901975 RANGER HEAVY DUTY™ 516887 LOW BOY HEAVY DUTY™ 901976 516889 516884 N.C. TOURING HEAVY DUTY™ WINDSHIELD 2-piece, full length, touring windshield assembly. This traditional full size police style windshield from National Cycle is a direct OEM replacement shield. Manufactured from clear hard coated Lexan® 4mm polycarbonate material which is ABE approved. Distortion free visibility and scratch resistant. Repl. 57996-60A. Note 1: Appropriate mounting kit must be ordered separately, except for FLHS models which can use stock mounting hardware. *Note 2: For 87-93 FLHS models it is advised you order lower adjustable window style C separately for better fitment around the headlamp. 508464 60-84 FL and FLH models; 87-93 FLHS (*Note 2) 508465 49-59 FL; 80-83 FXWG; 84-17 FLST's (excl. Springers); 93-05 FXDWG (clear) Replacement top window 513688 For Touring Heavy Duty™ windshields Mounting kits Note that 87-93 FLHS models will not require additional mounting brackets. OEM brackets can be re-used. 513661 80-83 FXWG; 84-08 FXST; 93-05 FXDWG 513662 49-84 FL, FLH; 77-84 FLHS 513663 87-17 FLST models (excl. FLSTS). No hardware required on 86-90 & 2006 Heritage; 87-99 FLSTC and 93-96 FLSTN models, when equipped with a light bar) N.C. CHOPPED HEAVY DUTY™ WINDSHIELD A chopped (lower) version of the 'Touring Heavy Duty™' windshield assembly. Same features and mounting requirements as the 'Touring Heavy Duty™'. Note 1: Appropriate mounting kit must be ordered separately, except for FLHS models which can use stock mounting hardware. Note 2: Billet windshield trim, shown on 516889 photo, is no longer separately available. 516885 60-84 FL and FLH models 516889 49-59 FL; 80-83 FXWG; all 84-17 FLST models; 93-05 FXDWG 516884 87-93 FLHS models Replacement top window 513689 For Chopped Heavy Duty™ windshields Mounting kits Note that 87-93 FLHS models will not require additional mounting brackets. OEM brackets can be re-used. 513661 80-86 FXWG; 84-10 FXST; 93-05 FXDWG 513662 49-84 FL, FLH; 77-84 FLHS 513663 87-17 FLST models (no hardware required on 86-90 & 2006 Heritage; 87-99 FLSTC and 93-96 FLSTN models, when equipped with a light bar)

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 48 NEW PRODUCTS ADDED WEEKLY AT / MOTORCYCLESTOREHOUSE.COM 516887 901976 Low Boy 901975 Custom 501165 926054 N.C. CUSTOM & LOW BOY HEAVY DUTY™ WINDSHIELD ASSEMBLY 2-piece windshield design. Larger than the 'Ranger Heavy Duty™' windshield, narrower than the 'Touring & Chopped Heavy Duty™' full size wind-shields. Light tinted grey, hard coated Lexan® polycarbonate material. Good scratch resistant and a distortion free vision. DOT approved in the U.S. for night use. Custom Heavy Duty™: Window is adjustable from 18-1/2" to 20-1/2" high, measured from the top of the headlight to the top of the window. Width is 19". Low Boy Heavy Duty™: Window is adjustable from 14" to 16" high, measured from the top of the headlight to the top of the window. Width is 19". Note: Appropriate mounting kit must be ordered separately. 901975 Custom Heavy Duty™ windshield assembly 901976 Low Boy Heavy Duty™ windshield assembly Mounting kits Note that these windshields mount with clamps to the fork tubes between triple trees. They do not fit with tin or aluminum FL style headlight housings. 509570 54-87 XL; 71-86 FX, FXR (35mm forks) 500294 88-20 XL (excl. XL883C, XL1200C/CX/T/X/XS, XR1200, 11-20 XL883 models). XL1200NS requires headlamp visor removal; 87-94 FXR; 95-05 FXD (39mm fork models) 500236 80-83 FXWG; 84-15 FXST; 93-05 FXDWG (41mm forks) N.C. RANGER HEAVY DUTY™ WINDSHIELD 2-piece windshield design which is identical to the 'Custom & Low Boy Heavy Duty™' but narrower. It's a combination of traditional Police styling and a custom low profile. Light grey tinted hard coated Lexan® polycarbonate material for superior scratch resistant and distortion free vision. DOT approved in U.S. for night use. Window can be adjusted from 13-1/2" to 15-1/2" high, measured from the top of the headlight to the top of the window. Width is 16-1/2". Note 1: Appropriate mounting kit must be ordered separately. Note 2: Billet windshield trim shown on photo is no longer available. 516887 Ranger Heavy Duty™ windshield assembly Mounting kits Note that these windshields mount with clamps to the fork tubes between triple trees. They do not fit with tin or aluminum FL style headlight housings. 509570 54-87 XL; 71-86 FX, FXR (35mm forks) 500294 88-20 XL (excl. XL883C, XL1200C/CX/T/X/XS, XR1200, 11-20 XL883 models). XL1200NS requires headlamp visor removal; 87-94 FXR; 95-05 FXD (39mm fork models) 500236 80-83 FXWG; 84-15 FXST; 93-05 FXDWG (41mm forks) FLH BEADED WINDSHIELD ASSEMBLY - IMPORTED Imported clear police style windshield assembly for 60-84 4-speed FL and FLH models. Windshield is made from acrylic, has classic beaded windshield edges, an adjustable lower window above the headlamp and comes complete with chrome plated mounting brackets. Repl. 57996-60. 501165 60-84 4-sp FL models N.C. DAKOTA 3.0™ WINDSHIELD A custom look for XL Sportsters and other models with narrow glide forks. High Impact Acrylic. Includes variable fork mount hardware. Without light bar 926054 17.5" (44.5cm) high x 18.3" (46.5cm) wide 926055 20.5" (52cm) high x 18.3" (46.5cm) wide For use with light bar Note: 516536 Light bar must be purchased separately. 926056 17.5" (44.5cm) high x 18.3" (46.5cm) wide 926057 20.5" (52cm) high x 18.3" (46.5cm) wide

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 49 AFTERMARKET PARTS & ACCESSORIES FOR CUSTOM MOTORCYCLES / MOTORCYCLESTOREHOUSE.COM 901211 901204 For Road King and Softail models 926059 926139 N.C. REPLACEMENT SCREEN Manufactured from hard coated Lexan® polycarbonate for optimum strength, scratch resistance and clear vision. Heights as indicated are measured from the center of mount hole to the top of the window. Will replace the stock windshield. The shorter, chopped, versions of these screens are favorite amongst many riders. 60-84 FLH models 901202 Clear, stock replacement (17 1/4") 901208 Light tinted, short replacement (7") 86-95 FLHT, FLHTC models 901203 Clear, stock replacement (11 3/4") 901207 Light tinted, short replacement (6 1/4") 96-13 FLHT, FLHTC, FLHTCU, FLHX models 901204 Clear, stock replacement (12 3/4") 901209 Light tinted, stock replacement (12 3/4") 901211 Medium tinted, short replacement (8 3/4") N.C., REPLACEMENT SCREEN Direct replacement screen for Harley-Davidson® Road King® and Softail® models, but better quality. Dimensions are identical. Manufactured from 4.0mm thick polycarbonate, 33% thicker than the OEM 3mm, for unmatched impact & crack resistance, making it virtually bullet proof. The additional Quantum® hardcoating makes it a 10x better scratch & abrasion resistant and a 2x better weather & ageing resistant screen than your current OEM H-D® shield. Available as a standard replacement DOT approved clear 27" overall height or a 6" shortened 95% gray tinted version with a 21" overall height. 94-22 all FLHR Road Kings. 926059 Clear. Std. height (27") 926139 Dark gray. 6" shortened (21") 00-17 FLSTC. 926138 Clear. Std. height (27") N.C. FLY™/BAD BOY™ & GEE BEE™ 4" REPLACEMENT SCREENS Dark gray 95% tinted. Manufactured from National Cycle's 3mm thick hard coated Lexan® polycarbonate for optimum strength, scratch resistance and clear vision. Modern low sports-bagger styling that fits as a direct bolt-on replacement for the OEM style screen on all FLHT and FLHX models with Batwing fairings. Re-use OEM hardware. Approx. dimensions: 4" (10.1cm) high, measured from the top of the fairing to the top of the screen. 14-23 FLHT, FLHX Touring, Trikes with Batwing fairing 592622 Fly Boy™ 592623 Bad Boy™ 592624 Gee Bee™ 592622 592623 592624 MATERIAL QUALITY National Cycle produces windshields made from 4 different materials; Acrylic, High Impact Acrylic, FRM coated Lexan® Polycarbonate and the ultimate... Quantum coated Lexan® Polycarbonate. Acrylic - GOOD Acrylic is known for its crystal clarity that stands the test of time with UV stabilization, which prevents yellowing. High Impact Acrylic - VERY GOOD High Impact Acrylic has the same clarity as regular acrylic and adds impact resistant. Acrylic will withstand 10 foot pounds*, High Impact Acrylic will resist up to 20 foot pounds*. FMR coated Lexan® Polycarbonate - BETTER Polycarbonate is the highest quality motorcycle windscreen material available. All Heavy Duty windshields are made of Lexan® polycarbonate. Impact resistant up to 200 foot pounds*. It is virtually unbreakable, optically superior and since it is FMR coated it can be repeatedly be cleaned using conventional methods, without scratching. It is the OEM motorcycle Industry standard and was developed by National Cycle Inc. Quantum® coated Lexan® Polycarbonate - BEST Identical to the Lexan® FRM Polycarbonate but the special Quantum® coating makes this windshield material 10x better scratch and abrasion resistant than the FRM coating, with 2x better resistant against weather & aging influences. The Quantum® coating is a recent process developed by National Cycle Inc. for windshield use and is currently the best worldwide! * Test consisted of: Free falling 5 pound dart of 1" diameter.

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 50 NEW PRODUCTS ADDED WEEKLY AT / MOTORCYCLESTOREHOUSE.COM 926152 926158 ´U´ clamp Quick-Set handlebar & fork mount kit Upgraded! From acrylic to hard coated Lexan® polycarbonate! N.C., DEFLECTOR SCREEN™ ABE and DOT approved. The Deflector screen™ was an acrylic screen but now upgraded to hard coated Lexan® polycarbonate for optimum impact protection and scratch resistance. The innovative 'rake adjustment' mount system allows a 100° angle adjustment. Fits most models, including Springers. Mounts to the handlebar with included clamps. Mounting hardware and instruction included. Dimensions 14" high and 15" wide. Note: Windshields installed with the Quick-Set mounting hardware allow tool-free removal in 30 seconds! Clear Tinted 926152 926158 With 1" & 22mm 'U' clamps 926153 926159 With 1" Quick-Set handlebars & fork mount kit 926154 926160 With 1-1/4" Quick-Set & fork mount kit 909564 926143 926155 "U" clamp Quick-Set handlebar & fork mount kit Upgraded! From acrylic to hard coated Lexan® polycarbonate! N.C. STREET SHIELD™ ABE and DOT approved. The Street Shield™ was an acrylic screen but now upgraded to hard coated Lexan® polycarbonate for optimum impact protection and scratch resistance. A black silk screened lower portion of the shield adds a stylish addition. Fits various diameter handlebars. Dimensions 17" high and 16" wide. Note: Windshields installed with the Quick-Set mounting hardware allow tool-free removal in 30 seconds! Clear Tinted 926143 926155 With 1" & 22mm 'U' clamps 926149 926156 With 1" quick-set handlebars & fork mount kit 926151 926157 With 1 1/4" quick-set & fork mount kit N.C. STREET SHIELD EX™ ABE approved high impact acrylic. The Street Shield EX™ version of the Street Shield™ is taller and slightly wider than the regular Street Shield™. The different mounting hardware included which allows you to install & remove the screen in 10 seconds, without tools. A black silk screened lower portion of the shield adds a stylish addition. Can be used on 1" handlebars only. 18.5" high and 19.5" wide. 909564 Tinted 926146 Iron Butt ready! NATIONAL CYCLE, PLEXIFAIRING™ 3 WINDSHIELD No show, all go! Universal clear maximum protection windshield for any rider that makes serious mileage, up to and including those entering an Iron Butt. Made from 4.5mm thick high-impact acrylic. Installs with No-Hole Ballsocket™ mounts and includes QuickSet™ hardware for easy on-off. Dimensions: 21.0" (53.3cm) high (headlight cut-out to top of screen) x 32.0" (81.3cm) wide (at widest point). 57-20 XL Sportster, 93-05 Dyna (excl. FXDWG); 82-94 FXR; Most others with Narrow Glide forks 926146 Clear

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 51 AFTERMARKET PARTS & ACCESSORIES FOR CUSTOM MOTORCYCLES / MOTORCYCLESTOREHOUSE.COM CULT-WERK, STREET BOB HEADLAMP MASK 'CUSTOM' Works with the stock LED headlamp and stock instruments. No changes required. The mask simply installs to existing mounting points and installation requires no modifications. Adjustability of the headlamp remains like stock. 5-axis CNC machined ABS for a perfect fit. Unpainted. Comes with approval. 18-20 Softail FXBB Street Bob; 21-23 FXBBS Street Bob; 20-23 FXST Standard 599132 Matte black 586249 Gloss black 22-23 Nightster RH950 964368 Matte Black 964369 Gloss black 586249 CULT-WERK, SPORTSTER S 'NRS STYLE' HEADLAMP MASK KIT Used in combination with the OEM Sportster S or a custom LED headlamp. Both remain, like OEM, adjustable. Kit comes with a matte black powder coated CNC laser-cut steel bracket and an unpainted high quality ABS plastic mask. Provides a more aggressive look and optically makes the bike lower & longer. Mount holes are pre-drilled and installation is bolt-on to OEM mounting points and compatible with OEM cables and wiring. Comes with approval. 21-22 Sportster S Must re-use the OEM Sportster S LED headlamp No modifications required for installation. 942214 Matte black 942215 Gloss black Kit includes Custom LED headlamp The OEM Sportster S headlamp is not re-used. A custom LED headlamp is included. Note: No modifications required for installation but the LED headlamp must be soldered to the wiring harness of the original headlamp, connector is different. 942216 Matte black 942217 Gloss black 22-23 Nightster RH950 No modifications required for installation. 964366 Matte black 964367 Gloss black 942214 942217 964366

Speedo Seats & Luggage- racks Frame Chassis Suspension Forktubes Wheels Brake Fenders Gastanks Motorparts Gaskets Intake Transmission & Driveline Exhaust Electrical & Lights Handlebars, Cables & Mirrors Oil tanks Oil & Chemicals Fasteners Windshields Forward controls, Footpegs Miscellaneous WINDSHIELDS 01 52 NEW PRODUCTS ADDED WEEKLY AT / MOTORCYCLESTOREHOUSE.COM CULT-WERK, FXBR BREAKOUT HEADLAMP MASK The hot aggressive performance look of the V-Rod for the Breakout. The Breakout will instantly look longer, lower and faster. Stock LED headlamp is reused and the speedometer will retain its original position. Made of ABS plastic with pre-drilled mounting holes and an almost paint-ready finish. The precision fitment is 100% and no modifications to wiring, cables or anything else is required. Hasslefree installation included! Comes with approval. 18-20 Softail FXBR 107; 18-22 FXBRS Breakout 114; 2023 FXBR Breakout 114 563591 Matte black 575560 Gloss black 563591 CULT-WERK, LATE V-ROD STYLE HEADLAMP MASK Transforms the 02-11 V-Rod to the 12-17 late model style and lowers the headlamp with the included steel headlamp bracket for a longer, lower and faster look. Manufactured from ABS plastic that is 5-axis precision CNC machined for a perfect fit. No modification to wiring, cables or anything else is required. Unpainted finish. 02-11 V-Rod, Night Rod 568384 Matte black 568385 Gloss black 09-17 V-Rod Muscle; 12-17 Night Rod 568386 Matte black 568387 Gloss black 568384 963028 CULT-WERK, 'NIGHT ROD STYLE' V-ROD HEADLAMP FAIRING KIT Manufactured from ABS plastic, pre-drilled and ready to paint. Works with stock headlamp and wiring. The included CNC machined headlamp brackets lowers the current headlamp position 50mm. Optionally the speedometer / instrument panel can be tucked away under the fairing and installed on the headlamp brackets, still offering an unobstructed view on the instrument panel. With this headlamp fairing kit the long, aggressive look is yours! 02-11 VRSCR Note: This headlamp fairing kit will fit Night Rod models, but in combination with the regular VRSC V-Rod headlamp only. 963029 Headlamp fairing kit 12-17 Night Rod, Night Rod Special, Muscle When installing this kit on a Muscle, only when the instrument panel is installed under the fairing, 3 additional holes must be drilled for the instrument panel. 963028 Headlamp fairing kit

RkJQdWJsaXNoZXIy ODQ0NDEw